Application Designed for blacksmith beginner or seasoned blacksmiths and Knifemakers to use to form (Drift) the hole needed to handle hand-made hammers, axes, or tomahawks etc.Our Axe Drift Tool provides you with exceptional forging strength, drilling/ punching the work piece giving you precise control over your work-piece while using heavy hammer blows over the anvil.It is forged with heavy-duty steel, built for long-term resilience and can withstand very high temperatures. Professional Blacksmith Drift Tool Blacksmithing Tomahawk Eye Drift / Mandrel Blacksmith Tool / Forged Axe Eye Drift.Used for making Wrapped tomahawk eyes or drifted eyes if proper opening slit is made. The process used by most smiths is to drill a series of small holes as close together in the center of the workpiece to be drifted.Once the holes are drilled heat the item and use a cold chisel or similar tool to split the piece.Once split, heat the piece again and drive the drift through the hole.Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired measurement.The process of heating may be needed several times to get the desired shape.