Very sturdy. Great bag. 10/10 will buy againI work HVAC, so carrying tools is an everyday occurrence. Tool bags seem to be designed more by people who don't carry tools, than by those who do. There just never seems to be the right balance of size, number of pockets, and space in a bag without it being so big it becomes unwieldy. I think I've tried so many bags, that a new one just doesn't get me excited, I just know it's not going to be "perfect", and usually, I just hope it won't be a hassle! Then I came across the Veto Pro MC. Reviews seem good, the bag is on the small side, kind of heavy, not very tall, high price, I dunno, nothing to get too excited about. We'll heck, I gotta try one when I saw it on sale.Quality is top notch all the way, even over built if that's possible for a work bag. It ought to last many years, even with lots of abuse! It swallowed up my previous bags tools no problem. It doesn't look big enough, and I kept thinking, OK I got all the tools in, how about getting them out to use, that'll be a hassle? Not so, seems almost everything is within easy reach, and goes in and out with no problem. I'm impressed. I actually added a couple tools over what I carried in my old bag! I've become a believer in closed bags for tool protection, no spilling in transport etc, so the MC is the cats ars in that respect. Also, I've come to appreciate bags with the waterproof tabbed bottom to keep things dry. It seems I'm always working in wet weather!The MCT, might have been the ideal bag, a bit taller, better outside pockets, etc, but at twice the cost, I dunno. A hair taller would be cool, but by no means a requirement. You know small size can be a benefit too.If I changed anything, it would be an inch or two taller, have large, front and back flap pockets, inside and out, but that's just nitpicking, and the MCT is available, so hats off to Veto Pro, great bag. I'm a fan now.I know it's hard to buy tool bags without seeing one in person, but you will probably be really impressed with the MC and MCT. Truthfully the rest of the lineup looks mighty heavy for me, that would be my only concern.I am not on here to write a review that sounds like the others. there is something I wish to point out though; I almost did not buy this bag because someone's review pointed out that you can not fit a hammer inside it, and this is true. but tonight I was reconfiguring a few things in my bag and realized that if you remove the shoulder strap from its ring, you can fit the handle of an estwing 16 oz hammer into the ring and then put the strap back on. when you go to pull the hammer out, it lifts right out without removing the strap. no need to put the hammer inside. as I said it is my fourth bag. I needed a smaller one for some smaller tools and the very basics, a couple screwdrivers, drill, some bits and a chisel or two, things that I might take into a small repair or service job as opposed to a full on project; for that I have two mid size bags - one for carpenters tools such as chisels, a bigger tape, punches, larger screwdrivers, small level and another mid size bag back up drill batteries, charger, hole saws, all the other drill bits, a fien tool and rotozip bits. I have yet another large pack - the xl which is older and worn which I have cut the pockets out of and that I carry my paslodes in. I still have to rely on open canvas bags for the bigger tools. unless you are a homeowner who can get away with one large one of these, once you buy one, you will buy more. do not go get the larger one right away; buy two mid size. I am 54 and found the large one was getting too heavy and was really not big enough, I needed the two mid size ones to carry all the stuff I have to keep on hand. these last forever, the one I said is worn is over 10 years old and always had a lot in it and on it in the van.Amazing tool bag lived up to everything I have ever herd about veto. Only concern is pockets are a little tight for my tools but that’s mainly my fault I carry to many.Excelente calidad, muy robusto, buen diseño.My husband loved the bag even though it was supposed to come in as camo but instead was plain brown ?Not enough space for my basic tools. Should of bought the next size up.This is by far the most I've ever spent on a tool bag. I've only had this bag for a little over a week, but so far I'm impressed. I'm a marine mechanic working on everything from small outboard motors up to large multi million dollar yachts. I like that the bag has a plastic bottom because there is a very good chance this bag will be sitting on a wet deck a lot of time. This bag will now be my go to bag for most electrical diagnosis and repairs. I can't fit everything in it I had in my old electrical bag, but I have everything I need 90% of the time. one thing I was really excited to be able to fit is a small 12v boost pack since a lot of times the only thing wrong with a customers boat is a dead or low battery. For the size of this bag it holds ALOT! here is a list of what I have in it.wire cutterswire stripperselectrical conector crimperswire tieswire tie tightener and cutting toolamphenol connector toolsdeutsch connector toolsmall butane torchcan of butane fuelset of electrician screw driversNoco GB40 genius boost pack and cablesremote starter buttonvarious jumper wiresvarious sizes of heat shrink tubingtest lightdivided container with various heat shrink crimp electrical connectorsFluke DMM with various leads other than just the probes that came with itGreat break down bag and small installation bag. Purchased this after getting sick of buying a new tool bag every 3 months as they broke down very quickly. Also carrying in tools I didn’t need all the time. I’m a commercial hvac engineer and have found this bag to be more than adequate for my needs fits gas tester, gas sniffer, electrical testers, non contact volt pen, Milwaukee m12 impact driver, wera bit set, wera ratchet set, various screwdrivers, spanner’s, grips, Allen keys and much more. Has a lot more room than you think. This is my first veto pro pac and you can tell the difference in quality straight away. Will not buy anything else. They are expensive but you get what you pay for. Comes with a shoulder strap. You won’t be disappointed with this purchase.I was so impressed by the Veto Open Top Tool Bag, I quickly added this Veto Pro Pac MC Bag for Handling Tools to complement it.Yes, it's very expensive but it's also superb bag! The bag has a very solid central divider, then either side has a variety of pockets. One side has the larger pockets for power tools, batteries etc. and the other side a larger number of smaller pockets for hand tools. As with the tote, all the tools are held vertically presented to you for easy selection.The advantage over the tote is that the bag can be closed to keep rain or splashes off electronic devices such as multi-meters.There's multiple metal loops inside and out on which to secure items.The zips are very tough and have metal pull tabs which could be locked with padlocks. Each flap has deep pockets on outside which can hold mobile phone etc.The plastic shell means you can place on damp ground, even in a puddle and water won't get inside. A shoulder strap is provided - bear in mind this has some heft to it even before you start loading up!With the 5 year guarantee this should be the last bag you'll need.This is the first Veto bag I have bought, thought it was a bit expensive at first but after receiving it and filling it I now know why.It takes more tools than any other comparable size tool bag/box i have ever owned I'm 64.It's very easy to fill and use due to great design and construction, the zips are very well made and should with care last years.The grip feels good in your hand and makes carrying the bag comfortable, the strap is great quality and if you need to travel distance with the bag it takes the strain well.If you have the means buy this you will not be disappointed.I was umming and arring about getting this as it's quite a lot of money, but I bit the bullet and purchased it. I was made up when it arrived and under close inspection I can confirm that the bag is very well made, the material is incredibly durable and it is like Dr. Who's tardis in there, it fits so many tools! I've had it on site for a few weeks now and it gets a lot of comments from other trades admiring it. All in all, definitely worth buying and very recommendable.These bags are no doubt top stuff, this MC bag looses 1 star because it just lacks in a couple of very MINOR areas such as no external tape clip, nowhere to store pens externally etc like the next size bags in the range do. It could have been the best bag ever but just skipped out on some little details. Still worthy of buying though, makes a great diagnostics bag. I can get all the basic tools in and test meter and my Impact driver with spare battery and sockets.